What should I do if the inkjet printer often leaks ink?

First of all, whether as a manufacturer or an end user, we have to understand the fact that ink leakage of inkjet printers is normal, but frequent ink leakage is abnormal. This is a major headache that plagues many inkjet printer users. The problem is also a recurring problem. This problem is difficult to stop. Only continuous improvement and optimization can be made to avoid ink leakage as much as possible. Today, I will share with you how to adjust your mentality in the face of ink leakage in the inkjet printer, how to deal with it correctly, improve and avoid frequent ink leakage, ensure the stability and continuity of production, and improve work efficiency and employee enthusiasm. The inkjet printer is leaking ink. It is recommended that users consider the following aspects: 1. Whether the machine uses original inks and solvents, this is very important. Incompatible or poor-quality consumables will seriously block the internal filter of the inkjet printer. The pipeline forms a blockage, causing ink leakage. 2. Is the machine too aging? Generally, inkjet printers with more than 10 years of use will have more problems. It is recommended to replace with a new machine. Relatively speaking, it is more cost-effective and more stable. In fact, it is more cost-effective. 3. Whether the machine has not been maintained for a long time, it is recommended to clean and replace the filter. Like a car, only normal maintenance can ensure the long-term stable and reliable operation of the inkjet printer. Although the inkjet printer is small, it affects the normal operation of the entire production line. It is recommended that you pay attention to it, and do not wait for the frequent occurrence of problems to deal with it. There must be some preventive maintenance programs. The ink leakage of the inkjet printer will be very stressful for the operating user. As the user or person in charge of the inkjet printer, once the inkjet printer has a problem, it will cause the production line to stop. At this time, there are two options: 1. Through own understanding and practical ability, handle the fault well. After the potentially profitable inkjet printer is installed, debugged, and accepted, it will conduct technical training on the operation and responsible personnel of the production line. It will not only explain the basic operation steps and processes (SOP), but also give troubleshooting guides. This guide includes text documents and video documents to assist us in troubleshooting and maintenance. This method is also the recommended treatment method for potential benefits. Once the printer has a problem, the on-site operator is the most anxious person. If the printer is not restored to normal working status, the entire production line will be affected and the time will be long. In the future, the overall production capacity of the factory will not meet the standard, the loss is very large, and the responsibility is also very large. If the problem can be found quickly through on-site judgment, and simple faults can be handled independently, it will save a lot of time waiting for after-sales engineers ,mutual benefit. 2. By contacting the supplier's after-sales service engineer, consulting and guiding the handling of problems. On the phone, technical engineers will find out where the problem is through step-by-step judgment and guidance, so as to make a targeted judgment on whether it can be handled on-site. For example, after ink leakage occurs, our first response is to Determine where the source of the ink leakage is, where is the ink leakage caused by damage or the ink leakage caused by the offset of the nozzle ink line. After judging the problem, carry out targeted operation guidance, such as repeatedly cleaning the nozzle, adjusting the ink line, or flushing before removing the nozzle, the filter before the nozzle, and the main filter. If the flushing does not solve the problem, use Spare parts, replacement of new filters to ensure that the machine can run in the first time, to code the product. In summary, when ink leakage occurs in the inkjet printer, we must first find a way to solve the problem, and second, find a way to find the source of the problem, determine the extent of the failure, and whether the same problem will occur next time To make a simple judgment, there is a preventive maintenance measure to assist, so that our inkjet printer is more stable and avoid unnecessary ink leakage.