What is the method to install the printer synchronizer

In the practical application of our inkjet printers, we usually need to use a synchronizer, so what is a synchronizer, and what is the use of a printer synchronizer? Let's take a brief look at the first effect of the printer synchronizer in practice. Simply put, the inkjet printer synchronizer is to make the inkjet printer print the font at the same time as the speed of the conveyor belt. The size of the printed font will not be affected by the unstable speed of the conveyor belt. The printer synchronizer is purchased The speed of the synchronizer should be 2000, 5000, etc. according to the actual speed of the production line. Products on the production line pass through the printer at a speed, and the printer synchronizer can make the printer print at any speed. What are the methods for the printer synchronizer in the process of practical installation? First of all: the actual situation of the shaft-shaft connection in the synchronizer of the inkjet printer, it is necessary to find the position of the driving shaft of the conveyor belt and detect whether the driving shaft is exposed, usually only the exposed driving shaft can be installed. Another condition is whether the driving shaft has a small shaft diameter, and a diameter larger than 5 mm is not suitable. If you meet the above two conditions, you can first consider the selection of shaft-shaft connection device plan. The shaft of the synchronizer is usually less than 5 mm. The simplest device method is to prepare a straight plastic hose with a slightly smaller inner diameter of 5 mm. According to the orientation of the synchronizer of the inkjet printer, the corresponding length of the hose is intercepted. One hose is the driving shaft of the conveyor belt and the other is the rotation axis of the synchronizer. The device plan that adopts the shaft connection is the best device method. This method ensures that the synchronizer receives the signal and synchronizes with the conveyor belt driving shaft, and avoids the error caused by slippage from the source. Second: Line-to-line connection If the installation personnel did not find the conditions for the axis-to-axis connection at the site, then only the line-to-line connection plan can be considered. The so-called line-to-line connection is the point touch of the supporting wheel on the rotating shaft of the synchronizer of the inkjet printer and the conveyor belt. When the conveyor belt moves, it drives the backing wheel and the synchronizer rotating shaft to move. The movement relationship between the rotating shaft and the belt is related to the diameter of the backing wheel. The larger the backing wheel is, the smaller the rotation frequency of the rotating shaft is, and on the contrary, the larger. Under normal circumstances, you can always find a suitable device location on the installation site. After the synchronizer device bracket is fixed. Check the touch tightness of the synchronizer wheels and belts. It should not be too tight, otherwise the eccentric force generated will seriously affect the service life of the rotating shaft. It is best to touch quietly.