How to use the printer correctly?
Inkjet printers have a wide range of applications in many industries, such as cosmetics and food packaging! Using inkjet printers can help us better print barcodes and patterns on products or packaging. There are many types of inkjet printers, which are suitable for various venues! The inkjet printer not only has high production efficiency, but also the printed text is very clear. The inkjet printer is a very precise machine, and we must use it in accordance with strict requirements in our daily use! If you do not follow the requirements, it may cause damage to the printer! So as to reduce the service life and printing quality of the inkjet printer, what do we need to pay attention to when using the inkjet printer? 1. The correct use of the inkjet printer 1. If the inkjet printer uses the side spray method, you need to apply some cleaning agent to the nozzle after turning on the next day, and wait for about two minutes before applying the ink. Squeeze the bag gently, and wait for the ink from the nozzle to flow out! Then put a piece of white paper in front of the print head, and then press the strong jet button to move the white paper in front of the print head, so that the effect of test jet printing can be achieved. In the experiment, if all the nozzles can eject ink, then it means that the machine can be used normally without any problems! But if there is a white line in the ink sprayed on the white paper by the nozzle, then the operator needs to squeeze the ink ribbon again! And repeat the previous work process until it can be done normally. 2. The printer must be handled gently and moved slowly when transporting! After the printer is powered on, do not unplug the nozzle line on the printer when it is powered on, if you do it without authorization! It may cause a short circuit to burn the nozzle. 3. If the inkjet printer adopts the downward spraying method, the operator must loosen all the screws on the nozzle clamp block after turning on the next day, and then move the spray dock to a horizontal position, and then follow The steps introduced in the second point are repeated until it is verified that the printer can be used normally and there is no problem! Then install the print head to the position where you need to print, and fix the print head with screws. What everyone needs to remember here is that you cannot change the position and direction of the nozzle before the handle screw is completely loosened! Because this will lead to poor fixation of the print head, which will affect the quality of printing.
