Analysis on the important role of conveyor belt in the process of product coding_Identification supporting products
The function of the conveyor belt is to place the product on a stable surface to ensure that the product passes under the nozzle of the small-character inkjet printer at a stable speed for marking and coding, which improves power efficiency steadily and efficiently. One of the core technologies of the printer conveyor belt is the frequency converter. Through the adjustment of the frequency converter and the control of the working system, the belt can move at a uniform speed, and the friction drives the product to move. During the movement, it can be accurately triggered by electric eye induction and signal triggering. Leave a clear and beautiful marking on the product. There are many types of conveyor belts, the standard length is 1.5 meters, the width is 45 cm, if it is for special industries, such as eggs, glass glue, generally Oulance manufacturers will recommend the use of customized conveyor belts. In the process of using the conveyor belt, although its working principle is simple, for friends who do not understand the circular operation of the inkjet printer, we need to briefly understand the role of each part of the conveyor belt and the impact of the failure of each part on the coding. , The specific parts involved are mainly the baffle of the conveyor belt and the adjustment of the conveyor belt speed. If the following situations occur, friends can solve them in a targeted manner. The conveyor belt baffle of the small character inkjet printer is a very important auxiliary tool. During the coding process, we require all products to be placed against the baffle. In this case, the products can be arranged in a neat order. Ensure good coding effect. Pay attention to the height when adjusting the baffle. The baffle should generally be located a little above the belt. If it is completely attached to the belt, after a long time, it will not only scratch the belt, but also bring resistance to the belt, which affects the work of the motor. . During the coding process, we should pay attention to whether the speed of the conveyor belt is uniform. If the belt speed is not uniform, it will seriously affect the position of the coding. During fast or slow transportation, it is possible that individual products may leak or spray. Crooked and so on. Generally, the main factors that affect the uneven speed of the conveyor belt are: deformation of the iron shaft at both ends or motor failure. Of course, the uniform speed is not absolutely absolute. If it is spraying some relatively small products, sometimes even a slight uneven speed of the conveyor belt will cause leakage. At this time, adding a synchronous encoder is a better choice. .
