Why use synchronizers and installation methods for inkjet printers_identified parts

Why do inkjet printers use synchronizers and installation methods, an indispensable accessory in the inkjet printer industry-synchronizers, then what is a synchronizer? What is the use of the printer synchronizer? Let's take a brief look at the main function of the printer synchronizer in actual use. Simply put, the inkjet printer synchronizer is to make the inkjet printer print the font time and the speed of the conveyor belt will not affect the size of the printed font due to the unstable speed of the conveyor belt. When purchasing the inkjet printer synchronizer The synchronizer speed of 2000, 5000, etc. should be selected according to the actual speed of the production line. The products on the production line pass through the inkjet printer at the speed, and the inkjet printer synchronizer can make the inkjet printer print at any speed. What are the methods for the actual installation of the printer synchronizer? First: the shaft-shaft connection is in the actual situation of installing the printer synchronizer, you need to find the position of the driving shaft of the conveyor belt first, and check whether the driving shaft is exposed, usually Only the exposed drive shaft can be installed. Another condition is whether the driving shaft has a small shaft diameter, and the diameter larger than 5 mm is not suitable. If you meet the above two conditions, you can first consider the choice of shaft-shaft connection installation plan. The shaft of the synchronizer is usually less than 5 mm. The simple installation method is to prepare a straight plastic hose with a slightly smaller inner diameter of 5 mm. According to the installation position of the synchronizer of the inkjet printer, intercept the corresponding length of the hose. One hose is the driving shaft of the conveyor belt and the other is the rotation axis of the synchronizer. The installation plan of shaft connection is a good installation method. This method ensures that the synchronizer receives the signal and synchronizes with the driving shaft of the conveyor belt, and avoids the error caused by slippage from the source. Second: Line-to-line connection If the installer does not find the conditions for the shaft-to-axis connection at the site, then only the line-to-line connection scheme can be considered. The so-called line-to-line connection is the point contact between the supporting wheel installed on the rotary shaft of the synchronizer of the inkjet printer and the conveyor belt. When the conveyor belt moves, it drives the backing wheel and the synchronizer rotating shaft to move. The movement relationship between the rotating shaft and the belt is related to the diameter of the backing wheel. The larger the backing wheel is, the smaller the rotation frequency of the rotating shaft is, and on the contrary, the larger. Under normal circumstances, you can always find a suitable installation location at the installation site. After the synchronizer mounting bracket is fixed. Check the tightness of the contact between the synchronizer wheel and the belt. It should not be too tight, otherwise the eccentric force generated will seriously affect the service life of the rotating shaft. Light touch is better.