AROJET industrial inkjet printer suppliers - a high-tech enterprise for industrial inkjet printing solutions

Problems that need to be paid attention to when the printer is switched on and off

by:Arojet     2021-07-25
In the actual use of the inkjet printer, we need to pay attention to many things, such as the consumption of inkjet printer consumables, the operation of the inkjet printer and avoiding unnecessary errors, which are necessary conditions for our good operation of the inkjet printer. During the operation of the inkjet printer, if the printer's power cannot be turned on and off well, it will have a great impact on the inkjet printer. So how should we operate the printer switch correctly? What matters should be paid attention to during the operation? Next, I will give you a brief introduction. In the actual operation process, please check the ink and solvent amount in time. If it is below the warning level of ink and solvent, you need to add or replace the ink cartridge and solvent cartridge in time. In the actual operation process, we also need to carefully check the machine pipes or joints for leaks. Once found, it should be dealt with in time. In the actual operation process, we also need to pay attention to the following facts: If you do not use the printer within a short period of 1-2 days, you do not need to use the automatic cleaning function, because frequent use of the cleaning function will cause the ink viscosity to drop rapidly and Affect print quality. Secondly, check the connection between the power supply and the ground wire regularly. If there is a malfunction, please repair it in time. In actual use, please ensure that the print head is correctly placed on the surface of the printed product. Before starting to print, please check the installation of the print head and sensor, and the fixing device is normal. If there is a deviation, it needs to be adjusted in time, otherwise it will have a great impact on the position of our coding.
Custom message
Chat Online 编辑模式下无法使用
Leave Your Message inputting...