Maintenance during the use of the inkjet printer: timely troubleshooting of machine faults, and prescribe the right medicine for the problem

The inkjet printer is a high-precision machine, and some parts are vulnerable parts. If you do not pay attention to proper maintenance during daily use, it is easy to malfunction, which will seriously affect the working efficiency of the machine and even the service life of the machine. The inkjet printer is a high-speed inkjet printer. When we use it, we strengthen daily maintenance to eliminate machine failures in time. To sum up the problems that often occur in inkjet printers, the following points are summarized: the correct use of ink, the quality of the ink directly affects the use of the nozzle, and it is serious, we must pay attention to the following points: First, it is best to use The ink recommended by the equipment manufacturer, because these inks have undergone rigorous testing and continuous improvement, which guarantees the equipment to a certain extent. Second, do not add any substance to the ink at will, and pay attention to check whether the ink expires. As a strict chemical, ink also has an expiration date. If the ink expires, it should be purchased as soon as possible. Otherwise, the print quality cannot be guaranteed. Third, check whether the ink viscosity is normal. The ink of the inkjet printer is very important. The viscosity of the ink has a great influence on the normal use of the inkjet printer. Fourth, the ink and solvent levels must be checked in time when the machine is in use, and must be added in time according to the procedure when it is low. For the vulnerable parts of the inkjet printer-the maintenance of the nozzle: First, pay attention to the working environment of the inkjet printer to prevent the large dust in the working environment of the inkjet printer from entering the nozzle, which will block the nozzle and affect the nozzle The printing effect shortens the service life of the print head. Second, in the use of inkjet printers, pay attention to the nozzle part of the nozzle surface that can not rub against any objects, and the fine hairs are easy to hang on the nozzle surface. Otherwise it will cause clogging and dripping, which will affect the coding effect. Therefore, it is very important to operate the machine strictly in accordance with the requirements. Third, when installing the nozzle, pay attention to the nozzle sockets must be aligned, not hard insertion. If the pinhole is broken or inserted incorrectly, the nozzle will not work normally, and when operating the nozzle or touching the nozzle plate, the operator The electrostatic factor must be eliminated, and the damage of static electricity to the circuit part of the print head is also very serious. Pay attention to the care of the inkjet printer: first, check the machine regularly, check the installation and fixing devices of the print head and the electric eye, the connection of the power supply and the ground wire, and regularly clean the fan filter. Secondly, the printer must clean the nozzle before shutting down and power off, and place the nozzle on the nozzle cover with a moisturizing sponge pad. This can ensure the nozzle condition and coding quality, and also extend the nozzle’s performance to a certain extent. Service life. Prevent ink, cleaning fluid, etc. from entering the socket of the nozzle. If the socket is contaminated, clean it with alcohol quickly. The machine has a certain service life. In daily use, you must be careful, pay attention to details, frequent inspections, and pay attention to maintenance.